How to install the lock clasp of the hand lock

- Feb 01, 2018-

Look at the lock buckle has been installed, the shell panel and door frame flat, with a slight curvature on the outside side, so as to facilitate the closure of the expansion of the lock tongue. After all the locks have been installed, check to see if the latch is locked in a small box in the lock shell when the door is closed. After the lock is installed, it means that the carpentry work of the door has been finished, and it is waiting to be painted. Sanjiang Ding Tai Lock, professional hand manufacturers, Huan ...

Next began to install the lock button, the master according to the Shell-plate line, so more accurate, beautiful. Chisel the hole with a chisel, deep in the middle, as it is put into a small box, and the lock is stuck in the box when the door closes.

Look at the lock buckle has been installed, the shell panel and door frame flat, with a slight curvature on the outside side, so as to facilitate the closure of the expansion of the lock tongue. After all the locks have been installed, check to see if the latch is locked in a small box in the lock shell when the door is closed. After the lock is installed, it means that the carpentry work of the door has been finished, and it is waiting to be painted.