How do you use and maintain hardware locks to extend its life?
Is your lock protected? How do you use the hardware lock? We learn to maintain the lock to extend its life!
First, a long-term guarantee of the lubricant for the lock body transmission part, or a large inspection after half a year to ensure the fastening and extend the life.
Secondly, when using the lock, when an abnormality is found, we can sprinkle a small amount of graphite powder or pencil powder in the lock cylinder slot to make the key plug and unplug smoothly. Safe to open.
Thirdly, it is necessary to carry out long-term inspection with the matching gap between the lock body and the lock plate for a long time, and whether the lock tongue and the lock plate hole are matched properly. In order to ensure the clearance between the door and the door frame, the lock body and the lock plate, it is reasonable to ensure the smooth use of the lock.
There are two points for the appearance and maintenance of the lock. First, during the decoration of the lock, do not touch the rubberized surface of the adhesive tape with the surface of the lock to seal the exposed parts of the lock handle, panel, etc., to avoid the surface treatment layer of the lock component. Erosion with acidic or alkaline materials and gases during the decoration produces spots, and the appearance of blistering and even delamination leads to poor appearance. Long-term surface wax sprays the growth of spots. Secondly, in the process of normal use, if dirt is present, it will be directly cleaned and dried with a cloth. Don't fade it, and wipe the lock body and handle with a damp cloth, because some metal locks will rust; alloy locks will wear away the coating, which will affect the original appearance.