Door handle installation method

- Mar 24, 2019-

Door handles have a certain useful life. If the handle is broken, how can we replace the glass door with a new handle?

installation steps:

1. First, the stainless steel door handles the new door lock piece device, passing the door on the side of the hole, and the component of the latch bolt curve of the security door is definitely guiding the surface of the door. The latch is used to quickly stabilize the gaze attached to the stainless steel pull glove. Then the Jiuzheng Building Materials Network entered the door of the door and the outer door handle that protruded from the outside. The cylinder, which is usually the same as two sleeves, with internal latch holes, would work well. Hold the door handle firmly until the cover is against the door. So Jiuzheng building materials network into the door of the door handle from the inside of the door.

2. Pull the hole on the cover plate to the outer door and pull the screw thread in the clockwise direction. Tighten the screw firmly and use a Phillips screwdriver. Finally, the screws on the side of the curved side that are curved around the inside of the door frame are arranged in an orderly manner, and the screws attached to the impact plate and the kit are reliably secured.